Join 412

Hello and thank you for your interest In Local Union No. 412 Plumbers, Pipe Fitters, HVAC Service Technicians and Pipe Welders.

We would like to know about you and your experience in the trade, if you would please fill out the form in full and provide us with a copy of your most current resume.

We will review your information and contact you to answer any questions you may have. Again thank you for your interest Local 412 we look forward in speaking with you.

join





UA Local 412 Plumbers and Pipefitters was chartered in 1910. For over 100 years we’ve been protecting the health of our nation through our Plumbing, Pipefitting and HVAC Service work. Our contractors employ the members of local 412 in many construction Industries. We work in the Heavy Industrial, Commercial and Residential Sectors. We also specialize in HVAC Service throughout the Central New Mexico region, where cooling systems are vital to the economy.

Our members are required to graduate from the UA Internationals certified and accredited Joint Apprenticeship Training Program which produces the best Journeymen in the industry. This 5-year apprenticeship program which requires an apprentice to have over 10,000 hours of on-the-job training as well as over 1,200 hours of classroom education from certified instructors means that you have the most qualified workforce at your disposal.

Our workforce takes pride in partnering with our signatory contractors to deliver sophisticated piping systems to the end user which are so important to the infrastructure of our community.

We do it right the first time, so when Medical Providers in Central and Northern New Mexico build new or expand existing facilities, they call on the skilled members of Local 412. The complicated medical gas installations are a vital piece of life saving equipment, along with equally important commodities such as steam systems, potable water systems, and comfort piping systems. These systems are necessary to support the facilities which ensure public safety and saves lives.

About Plumbers, Pipelayers, Pipefitters, and Steamfitters

Plumbers, pipelayers, pipefitters, and steamfitters install, maintain, and repair piping systems that carry liquids and gases. Each group of workers specializes in a specific type of piping. Plumbers are most often called upon to install and repair residential and commercial pipe systems and to install fixtures such as bathtubs, toilets, sinks, dishwashers, garbage disposals, and water heaters in residential and commercial buildings. They may also install or repair water pipes, waste disposal pipes, and drainage and gas lines. Pipelayers dig and level trenches and then lay cement, plastic, iron, or clay pipes for drainage, sewer, water, or gas systems. Once the materials for these systems are laid out, pipelayers use glue or cement to join the sections together. Pipefitters install, maintain, and repair both low pressure and high pressure pipes that are used for commercial purposes, such as hydroelectric power plants, factories, or central air conditioning or heating. In addition, they install automated controls to regulate systems and keep them working properly. Steamfitters perform tasks that are even more specialized. They are involved in installing pipes that transport materials such as gases that move under extremely high pressure. Finally, sprinklerfitters install automated sprinkler systems in buildings as part of fire alarm systems.

Workers in each of these fields use a variety of specialized tools and techniques depending on the type of project. For example, plumbers working on residential construction may use copper, steel, and plastic pipe, while those working on a sewer system work with large cast iron pipes. All pipelayers, regardless of their specialty, need to be able to read blueprints, follow instructions from builders or contractors, and plan out the work to be done. They must be efficient and capable of performing the tasks associated with their jobs.

While some workers learn informally on the job, most plumbers, pipefitters, and steamfitters learn the trade by completing an apprenticeship program sponsored jointly by local unions and their affiliated companies or nonunion contractor organizations. Pipelayers begin work as helpers and get their training on the job.

In order to be accepted into an apprenticeship program, applicants must be at least 18 years old, be a high school graduate or have a GED, and be legally authorized to work in the United States. Most apprenticeship programs are structured work programs that take four to five years to complete. During this time, the apprentice not only works, but must also complete at least 144 hours of relevant classroom instruction each year. Training in plumbing, pipefitting, and steamfitting received in the military is highly desirable, and credit for this experience is often given to those who enroll in civilian apprenticeship programs.

Most states require licensing for plumbers. However, there are no national licensing requirements. Requirements vary by locality. Most areas require workers to have two to five years of experience and pass an examination. Only a few states require licenses for pipefitters and those who work on gas lines.

Plumbers, pipelayers, pipefitters, and steamfitters are among the highest paid professionals in the construction industry. The median hourly wage for plumbers, pipefitters, and steamfitters is $21.94. The middle 50 percent earn between $16.63 and $29.66 per hour. The lowest 10 percent earn less than $13.22 per hour and the highest 10 percent earn more than $37.93 an hour. The median hourly wage for pipelayers is $15.72. The middle 50 percent earn between $12.84 and $20.85 per hour. The lowest 10 percent earn less than $10.75 per hour and the highest 10 percent earn more than $27.43 an hour.

The Bureau of Labor Statistics (BLS) Occupational Outlook expects above average employment growth of about 16 percent over the next 10 years. An increased demand for plumbers will be fueled by numerous factors, including new construction, building renovations and retrofitting, and the need to repair existing equipment. Employment growth for steamfitters and pipefitters will be driven by the construction or maintenance of power plants, water and wastewater treatment plants, and office buildings and factories. Pipelayers may see an increase in job opportunities due to the need to build new water lines, sewer lines, and pipelines to new oil and gas fields. Changes to construction codes requiring the installation of fire sprinkler systems in residential buildings will increase opportunities for sprinklerfitters as well.

Source: http://www.distancelearningplan.com/plumbers-pipelayers-pipefitters-and-steamfitters.html

Advantages

1. In the United States in 2009, 13.7 percent of all wage and salary workers were represented by a union.

2. In 2009, 92 percent of union employees in the U.S. had access to health care benefits, compared to only 68 percent of non-union workers.

3. Union workers get 28 percent more days of paid vacation, on average, than non-union workers

Our Mission Statement

To be the most helpful organization to our members and signatory contractors by supporting both with pride, dignity, and honor!

UA Local 412 Core Value Statement

The United Associations Visions and Mission Statements are rooted in the “Core Values” of the Organization. Core Values define the ideals we believe in and the principals we’ve stood up for in the past and we will fight for in the future. The United Association and Local 412 are committed to the following on behalf of its members:

1. UA Local 412 will assist every member in attaining the skills, knowledge, and capabilities needed to maximize their full work life potential and obtain continuous employment and long term job security.

2. UA Local 412 will promote the highest craft qualifications and skill training for our trades to secure the best wages and jobs for our members and continue building our world-class piping industry workforce.

3. UA Local 412 in the interest of our members will implement, and enforce the best policies and programs to increase our market share, and expand employment opportunities, and extend union representation to all workers in the piping industry within our jurisdiction.

4. UA Local 412 acknowledging the importance of health and welfare and pension benefits for our members and their families will continually strive to provide the best benefits for our members and their families through their working lives and retirement.

5. UA Local 412 will continue building stronger relationships with our industry partners, including contractors and project owners, and work to promote our common interest in developing the unionized sector of our industry.

6. UA Local 412 in recognizing the importance of protecting the members’ gains made through collective bargaining, will enact the political will of the members and institute the political activities to protect our members in the workplace and promote their interests and those of their families in all aspects of their lives.